How to fix a nose stand on optical frames?

Written by Optician Club on . Posted in Optician News

fix a nose stand on optical frames

Q: How to fix a nose stand on optical frames?

A: Prepare the work area. Place a serving tray using a table. A serving tray features a lip surrounding the tray's surface that may steer clear of the eyeglass screws from falloff the table. Lay a clean white cotton rag about the tray's surface. Put the eyeglasses about the rag and also the necessary tools within close range.

Eliminate the nose pads. Most glasses use nose pads which have been kept in place by way of setscrew. The screw is situated on the side of the pad's mount. Utilize a small standard jeweler's screwdriver to loosen the screws. Turn the screw counterclockwise before the old nose pad is easy to remove looking at the mount. Pull the pad out. Usually do not take away the screws since they're challenging to thread whenever they are outside of their mounts.

Inspect the nose pad mounts for damage. The mounts are typically produced from pliable metal so they can be adjusted to install the wearer's nose. After a while, they become bent beyond alignment and sustain metal fatigue. Look for stress lines inside the metal on the welded joint between base of the mount along with the glasses' frame.

Reposition the pad mounts. The longer the glasses are worn, the harder the degree of mount misalignment. Keep the shaft on the mount with needle-nose pliers and bend until it matches the alignment in the opposite mount.

Clean the mounts. The wearer's perspiration causes grease and debris to gather for the mounts after some time, eventually dealing within the rubber pads, discoloring and chemically breaking them down. Mix 4 tablespoons of liquid dishwashing detergent with 16 ounces of trouble. Dip a cotton swab into the soapy mixture. Clean the mounts by rubbing the tip on the swab through the surface.

Replace the nose pads. Most eyeglass repair kits feature replacement pads. Make square base of the pad and it into the pad's mounting hole at the top of the mount. Tighten the mounting screw which has a jeweler's screwdriver till the pad is held firmly in position.

Related Posts:

Can you help me for the uncomfortable nosepads?

Optician Club

Dedicated to Independent Optometrists and Opticians. Make you benefit from China eyeglasses manufacturing while minimizing investments and risks.